Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Thursday, August 9, 2012

Tutorial: Layers of Beauty

Hi Y'all! My little blog isn't going to know what to do with all these visitors!

Today I've got a stamping technique for you to try that provides lots of visual interest without taking too much time or effort on your part, sound interesting?

Your challenge is to create a card using the seamless tiers technique and fall colors.

The place that I learned this technique from called it seamless layers, although I have seen it go by other names as well, such as triple stamping. In short, you use multiple stamps on several layers and on each layer the images flow smoothly to the next. The trick to this technique is in lining up the images on each layer.

Here is a peek of the 'layers'


 To start out, you will cut your cardstock to have three layers. I've cut mine so that each of the layers are proportionatly smaller than the next, how you cut yours is personal preference.

Since I like to cut my cardstock all at once, I also cut the 'mat' layers at this time. Simply measure your top and middle layer, and cut your cardstock 1/8" larger by length and width.

Here is what you should end up with...



My measurements were:

     Card layer          Mat layer
     4 1/4 x 5 1/2      -----
     3 1/4 x 4 1/2      3 3/8 x 4 5/8
     2 1/4 x 3 1/2      2 3/8 x 3 5/8

Remember, these sizes are just what I used, you may make your layers any size that you want to.

This is how your layers should look when stacked together, notice how each 'mat' layer provides a small 'frame' for the layer above.


Now, stack your three card layers and use temporary adhesive to hold them together.



Its a little difficult to see, since they are all the same color, but hopefully you can get the idea.

If you are planning on using a sentiment on your card, stamp that first. Once you get going on your images, you can sometimes run out of room!



Fill your card front with images, just place the stamps on top of the layers and stamp normally.



There will be space between the layers where the image does not transfer because of the difference in height from one layer to the next. Don't worry!



We'll take care of that in the next step.

Pull apart your layers and add the mat layers to the back of the first two layers.



Now stack everything back together again, using permanent adhesive this time. This is the point to add any ribbons, embellishments, or coloring that you might want to finish off your card.



Do you see how with the addition of the narrow mat layers the eye just flows from one layer to the next? And how easy was that to line up all of your images?

I decided that this card needed very little embellishment, and just layered a single colored butterfly with foam adhesive for dimension.



I think that this technique provides a subtle elegance to the card, and can easily be used for many different occasions. This card went to my daughter from her daddy to encourage her during her Coast Guard basic training, and I whipped out several of these in May with Congratulations sentiments and stars all over for Graduation cards.

I look forward to seeing your Layers of Beauty cards with fall colors on the forum!

Thanks for stopping by,

Meredith

Wednesday, August 8, 2012

Tutorial: Color in Your Soul

Welcome! 

I'm glad to see you found your way over from the Cardmaker crop forum.

My challenge to you for today is to use the following coloring and embossing technique to make a tag.

Believe it or not, we're going to take our paper tags from this...




to this!




If you didn't get a chance to read the supply list on the forum here then go ahead and gather them now.

You'll need:

  • cardstock base for your tag
  • ink in several colors (I used distress inks)
  • blending tool
  • clear embossing ink
  • background stamp
  • image stamp
  • clear embossing powder
  • heat tool
  • embellishments to your liking


Start by cutting your cardstock to the size you would like your tag to be. Mine is a large one, almost three inches by six inches.




Use some lighter ink color(s) and a blending tool to color the cardstock as a background for your tag. I used two colors (yellow and green) and randomly blended them over the tag.




Using a darker ink, stamp your background stamp on the tag. Don't be afraid to stamp something other than the traditional strait background here...I angled my stamp and used it more than once, to vary the lines.




For this step you will want to line your supplies up and have them handy. Stamp your image with clear embossing ink, then cover with clear embossing powder. Shake off the excess powder. Some stampers find it handy to wipe the surface of the cardstock with a static cling eraser thingamajig to keep the embossing powder from sticking to anything other than the ink...you decide.


The fuzzy looking spots are the unmelted powder covered spots.


Use your heat tool to melt the embossing powder, I love how shiny it is!




Use a darker ink and blending tool to color over the entire tag, including coloring over the clear embossing. Don't worry, you won't ruin it!


halfway colored

all done!

Now use a paper towel or rag to wipe the excess ink off the embossing, revealing the original colors beneath the embossed image!

Finish up by embellishing the tag any way you would like to to finish it. I made a larger tag and finished it as a bookmark, since reading is often one way that I am pampering myself!




Supplies used for my tag:


  • Cardstock:(cream,gold)Recollections;(green)scrap
  • Inks:(embossing)Versamark;(colors)Ranger Distress Ink
  • Stamps:(text background)Stampabilities;(sunflowers)Local King Rubber Stamps;(sentiment)Inkadinkado
  • Embossing Powder:(clear)Recollections
  • Ribbon:(cream)Best Value Organdy Ribbon Joann's;(green)Offray;(brown polka dot)The Ribbon Boutique Hobby Lobby
  • Punch:(vintage label)McGill


I look forward to seeing your creations on the forum board here and if you have any questions, please do not hesitate to ask!

Thanks,

Meredith

Sunday, April 3, 2011

I Got Crafty: Burlap Dry Erase Board



Well, I decided to have a bit of fun in the craft cave again...I should do this more often, since it ends with something nice for my home!

It started with the kitchen renovations...that story is on the other blog...here..., and no, we're not done yet...but soon, very soon...

Anyway, now that I actually have a PANTRY in my kitchen ... yeah! ... I have this great view from the dining room table ...

Photobucket

Well...that could use a bit of something, couldn't it?

I was sure that I had the perfect idea...here is how the conversation went...(sort of...)

Me: Hey hon, wanna hear my great idea to put here?

Dh: Sure, whatcha want to do?

Me: I'm going to get an old kitchen cabinet door, then I'm going to paint the outside green like the kitchen walls, then paint the inside part with chalkboard paint...and we can have a chalkboard for our kitchen! Won't it be great?

Dh: Chalkboard? Why chalkboard? That sounds dark. I like whiteboards better, they're so much easier to use...could we just hang a dry erase board there?

Me: (dumbfounded look...) Dry erase??? Why would I want a big ugly whiteboard there?

So...enter blogland...(Thank you, blogland!!!) In one of the fabulous linky parties out there I ran across this tutorial from Get Your Craft On, and inspiration struck!

I decided to try my hand at a tutorial-type post...so bear with me...

Gather your supplies:

Frame with glass
burlap (or fabric, or paper...whatever you want)
masking tape

I pulled out a frame from the back closet, I bought this one at Kohl's on sale...

Photobucket

I'm not even going to come close to admitting how long ago I purchased this...

Then pulled out the burlap, (come on, you know you have some sitting at home, ready for a project....don't you?, don't you?)

And cut a piece to extend around the cardboard backing of the frame.

Photobucket

I got out the extremely specialized tool then...the masking tape...and stretched the burlap around the cardboard, taping it in place to hold it down.

Now, I didn't take pictures of the in between step...but now would be a good time to clean the glass really well...before you reassemble the frame...

Photobucket

I did miter the corners (sloppily though) to cut down on the bulk...but as you can see, this is not a fancy job...hey, its the back...if I hadn't taken pictures, no one but me would ever have seen!

Put your glass back in the frame, put your burlap covered backing in....and flip it over to see your fabulous new dry erase board!!!

Photobucket

Hmm...........that's.............uhh..........well............underwhelming...............is the word that comes to mind...hmm...........

Well....now what do I do? I could cut some vinyl...or use a stencil and paint a design...or cut some fabric....or, I could take a look around what is currently my crafting passion and so is readily accessible in my craft room....stamping!

So, how about a few more supplies:

rubber stamps ( I used a fabulous one from Unity Stamp Co)
dye ink (I used Tuxedo black by Memento)
ribbon, whatever you've got that looks good with your project

After experimenting for a bit with some spare burlap I decided on a border look, rotating and repeating the stamp across the top and bottom...with the ribbon as an accent.

So let's take a look now, shall we?

Photobucket

Photobucket

Much better, yes? I left a lot of blank space...as the intention is really to use this as a memo board...but you can get as creative as you would like to to suit your project!

One last thing...the dry erase marker...I know that I could just let it sit on top of the frame...or tie it on with a ribbon...or even attach it with some velcro...my children are old enough that having the marker easily accessible is not a problem...but I didn't want to have it out...its not exactly pretty, you know?

Photobucket

So I tucked it away inside the cabinet door using some self-stick velcro...see? Nice and handy, but out of sight...good!

Here are the before and after views...

Before:

Photobucket

And now:

Photobucket

please try very hard to ignore the pile of dirty dishes in the sink...and on the counter...I had to take the pictures while I remembered to during the daytime...be nice!

...not exactly Ballard Designs...but better than nothing!

Thanks for reading! I hope you enjoyed my little tutorial!

I'm linking this post up over at Funky Junk Interiors Burlap Theme Linky and the Tatertots and Jello Weekend Wrap Up Party.


Meredith